Sodium Analyzer
Sodium Analyzer
Na+
Applications
- Ultrapure water production/monitoring
- Water/steam cycle
- Power plants
Description
The 3S-NA sodium analyzer takes measurements with an Ion Selective Electrode (ISE) sensitive to sodium ions in solution. The response of the electrode is proportional to the sodium concentration in the sample on a logarithmic scale. The instrument can take measurements on (up to) four different input streams. The multiposition switching valve makes the channel selection operations fully automatic, with timing and scheduling programmable by the user. Each sample line has its dedication fast loop reservoir to minimize cross interferences and switching times.
Method
Features
| Measured parameter | Na+ | ||
|
Range
|
|||
|
Reproducibility*
|
|||
| Demineralized water | Not required |
| Number of reagents | 1 |
Reagents and standards
Safety Datasheet
Technical Specifications
| Model | 3S-NA |
| Sampling Mode | Continuous. |
| Sample | Pressure: Atmospheric Temperature: 2 ‐ 55°C (36 ‐ 133 °F) Flow Rate: 80 to 500 mL/min Connection: 6 mm (¼-in.) |
| Drain |
Pressure-free drain Connection: 12 mm (½-in.) |
| Input Streams | 4 |
| Material | Epoxy-coated stainless steel AISI 304 |
| Dimensions (H x W x D) | 604 x 380 x 210 mm (23.6 x 14.8 x 8.2 in) |
| Weight | 20 kg (44 lbs) |
| Power Supply |
Input Voltage: 115 VAC,230 VAC Power consumption: max. 80 W |
| Output signals |
4 x 4-20 mA analog outputs Modbus via RS485,Ethernet |
| Alarms | 4 SPDT programmable voltage-free relays |
| Digital Input | None, Online, Start Extra, Skip Idle, Emergency Stop |
| Ambient Temperature | 5 - 45 °C (41 - 113 °F) |
| Ambient Humidity | 10 - 90 % RH (non-condensing) |
| Protection Grade | IP54 (indoor only, outdoor use possible with external cabinet, not included) |